Australia, Company News, Feature, Transport Industry News, Truck Product News, Truck Reviews, Truck Technology

Test drive: Scania’s new 500hp Super P

Warren Aitken took Scania’s new 500hp Super P for a drive around some of Melbourne’s hillier roads to put the Swedish beast to the test

Full disclosure – I have always been a bit of a Scania fan. I’ve driven plenty of them and loved pretty much all of them. The majority of my experience was back in New Zealand, where I had the pleasure of experiencing the mighty Series 3 450s and even putting some miles on the big 530hp V8 when it first broke ground. By the time I got to experience the Scania prowess over here in Australia, I was behind the wheel of a 730hp monster and pretty much all the gearsticks had been replaced by automatic transmissions that are much smarter than I’ll ever be.

While Scania has a considerable array of variants to cater for every vocation, my experiences were limited to the ‘big boy’ versions, or more appropriately, the R-Series. I had a little bit of time behind the wheel of a couple of G-series, but the P-series was new to me, hence the opportunity to take one of these workhorses for a spin and check out the new 500hp Super P version was too good to pass up.

Let’s do all the technical information first. The P-series is labelled as Scania’s most versatile cab range. Its low weight, low height design makes it a perfect jack-of-all-trades urban truck – having the low height gives you extremely easy access. Even for short guys like me, the two-step entrance is easy. Add in the visibility from the low set windscreen and the truck is ideal for working and delivering around cities and industrial areas. Top it all off with the standard safety features synonymous with Scanias, as well as the creature comforts you expect from the Swedish stylists, and you have a truck that drivers are happy to inhabit for more than just a local delivery.

Image: Warren Aitken

It was a truck designed to do all the important ‘behind the scenes’ work, keeping the world of transport revolving while never really chasing the limelight of its bigger brothers. The main thing that tended to hamstring the P-series from chasing the limelight that its bigger R-series and S-series brothers got was the power package underneath it. The traditional 13-litre straight six motor available in the P-series topped out here in Australia at 450hp. When the double overhead cam SUPER engines first hit Australian shores, that increased to 460hp. Overseas, Scania did offer 480hp versions, however it wasn’t seen here in Australia due to the fact we can melt bitumen on a winter’s day here and the cooling package wasn’t on point for that.

However, the latest evolution of Scania’s SUPER engines has seen the playing field change again. The new P-Series engine, with a larger cooling package, is wound out to 500hp and 2650Nm of torque – that’s topping the torque tally in the 500hp field and it’s even putting in a competitive total in the 540hp market. It’s not just the numbers that count – as the saying goes, ‘it’s not how big it is, it’s what you do with it that counts’, and the six-cylinder Scania SUPER engine is doing all the right things with its torque curve.

“The torque curve is actually a torque straight,” Scania sales director Benjamin Nye says.

“It’s as flat as a pancake from 900-1320 rpm, and what this means on the road is effortless driveability. The 500 P will eat hills for breakfast and head to the mountains for a snack before lunch.”

All of a sudden, the P-series has added a very strong string to its bow and, along with doing all the grunt work around town and on smaller missions, it is equipped to suit up and fill in on those big boy roles when needed. That’s where our test drive comes in – testing out the P-series with a loaded single, grossing 36,560kg and a B-double setup grossing 56,160kg.

In order to put the P-series and it’s 500hp SUPER engine through its paces, Scania had us traversing the hills west out of Melbourne, heading a couple of hours down the road so we could find a couple of decent hills to test out these pocket rockets. I began with the stunning silver Scania and single trailer in tow, accompanied by Benjamin Nye himself, who was happy to sit and talk me through the new SUPER engines.

What I will say first is focused on the ease of settling into a Scania – whether you have driven millions of miles in them or merely experienced a quick trip round the corner, once you are starting out there is a comfortable familiarity about the Swedish setup. Everything is so handy and accessible and it always feels very natural – it took me all of two minutes to get my set-up right and the steering wheel adjusted. You would add another couple of minutes if you wanted to link your phone to the media setup, but I was happy for the harmonious melodies of a Scania salesman.

Once we headed out of the Laverton workshop, I focused on negotiating the ever-friendly Melbourne traffic while Ben unveiled the thinking behind the move for a 500hp P-series.

Image: Warren Aitken

“The opportunity came about to introduce the 500hp in the P-cab and the reason we’ve done that is it opens up this truck to really become the jack of all trades. It’s a good single trailer truck as we are now,” he says.

“It can also do B-double. You can have it in your fleet, predominantly doing single trailer or light B-double work, and if something happens and one of your big trucks go down, you can actually stick it under a heavier load and do a Tarcutta changeover. It has the ability to adapt into different roles.”

MORE OWNERDRIVER TRENDING STORIES:

I must admit I did a terrible job of taking note of the P-cab’s performance heading out of Melbourne towards Torquay. There are several rolling hills and a couple of step climbs, but the little P-cab just ate them up and never gave me any indications that we were under load nor strain. The conversation with Ben was effortless in the insulated cab and, if it wasn’t for my predilection for using the Scania retarder, you could almost feel you were taking a luxury car out for a cruise. The latest Opticruise automatic transmission is incredible with its foresight and efficiency. Pair that with the low torque range on these SUPER engines and the changes feel seamless. There is no dropping late and struggling to pull out of the doldrums. Every change seems timed to land perfectly on that Scania torque range and just keep cruising.

The impressive gear selection was a lot more evident with the B-double where the truck was doing a bit more work. With the single behind and sitting just below 40T, the P-cab Scania felt like a champion weightlifter warming up with just the bar. It was going through the motions but never really challenged.

After a quick spot of lunch, I grabbed my gear and jumped in the other demo, this time with the B-double behind and sitting closer to 60t. This was what I was keen to test out. It didn’t take long either – the back roads out of Torquay included a left-hand turn from a roundabout straight up a steep pinch and onwards to the M1. Rolling through the round-about, we hit the pinch with little to no momentum and you could feel the SUPER engine doing its work – I mean that literally as well.

The thing about the P-cabs is they do sit low and as such you have that engine mound between the seats. It still features incredible insulation so it’s not screaming or heating up like the old classic used to, but it does offer a little more feel to your drive. You can hear the hum of the six cylinder beside you and you can get a sense of the engine doing its job, more so when the truck has slowed and is climbing into the challenge. It was almost like you could feel all 2650Nm strapping on and pitching in to pull the 57t vehicle up the hill. The stillness and quietness of a Scania cab meant you could focus on appreciating the work going on beneath you.

It really is nice to feel a truck working – there was never any hint of struggle, just purpose. After that steep climb out of Torquay, the rest of the hills felt more like undulations than actual challenges. By the return, you almost felt guilty for how easy the run was.

There is a lot to love about the P-series and kudos needs to go to Scania as well. Obviously, the exhaust brake and retarder combination is still one of the leading lights on the Scania CV, and that hasn’t changed.  You have the comfort that comes with years of building quality trucks that also hasn’t changed, and you also have the new safety additions that Scania keeps improving like the Blind Spot Monitoring system. On each of the front pillars is a decent sized light that glows yellow whenever a vehicle is spotted beside you. While this concept isn’t new, the Scania light placement is. It is perfectly placed for your eyes to catch it every time you are checking your mirrors without ever deliberately looking for the light. Obviously, some wizard in engineering calculated the perfect positioning and nailed it.

Image: Warren Aitken

As for the P-series progression into the 500 market and whether it has nailed its objective, I can definitely see them succeeding, as it really is the perfect jack of all trades. From a driver’s point of view, it is still the perfect round town rig, small and manoeuvrable enough to do the local and domestic jobs required of it, with great vision and access making it an easy truck to operate. Now, with a big enough package underneath it, it has the means to step up and help the big boys out if you need to send it away for a couple of nights. There’s room for a driver to get some kip and it is comfortable enough that you are not going to be complaining after 14 hours behind the wheel.

The technology packed into the small P-series means it also ticks all the boxes from an operator’s point of view as well. Its light weight cab, with easy access and great visibility, means it’s a truck for everyone to drive. The new 13 litre SUPER engine comes with estimated fuel savings of eight per cent, a number that has been found to be easily exceeded by many customers. The safety features fitted to the P-cab, like the Advanced Driver Assistance Systems, the latest blind spot and vulnerable road user radar warning systems and industry-leading standard rollover protecting side curtain airbags fitted above each door, ensure the P-series are right up there for driver safety. Then you have the flexibility of design. I am not going to get into listing the hundreds of interior options – that’s too big to portray. The variety of build options available for a P-series include a 4×2, 6×2, 6×4, 8×2 and 8×4, as well as a 10×4 with lazy or steerable tag axles. Alongside a range of cabs from day cabs to sleepers, the P-series really is a jack of all trades and it now has the power to be the master of many as well.

Subscribe to the weekly Owner//Driver newsletter here.

Previous ArticleNext Article
  1. Australian Truck Radio Listen Live
Send this to a friend